Inner Barrel Help!

[clutch]

Can anybody help me out with knowing what inner barrel ( size) upgrade for my gun, need a longer one due to the External barrel upgrade i did and dont know anything about inner barrels it has a 6.03mm Precision Barrel already in it. Thanks !

[Bigun]

A couple of questions for you to help out on this:
1) what is the gun type and manufacturer (helps in determining stock length)

2) what is the length of the barrel extension?

and

3) Do you want the inner barrel to extend to length of the barrel extender or no?

Once you have the 1st two measurements, you should be able to determine the best length barrel for your needs. If you post them up here I'll be happy to help however I can with suggestions.

Bigun
_________________

[Shadowolf]

You da man Bigun!
_________________

STRENGTH & HONOR,

SHADOWOLF
CO - T.E.A.R.S
MOBILE, FLEXILE, HOSTILE

[clutch]

Its a G&G G4-A2 custom made blowback, the only thing i can conclude is that it has a 10 in. one piece outer barrel with a 6.03mm Precision Barrel in it already then i just got a M4 Outer Barrel Extension that threads onto a CQB length barrel and extend it to the standard M4 length. i would like for the inner barrel to extend thru the add on for more range and acc. [img][/img]

[Tandy_Anderson]

best length would most likely be a 363mm it is what runs standard in m4 lengths
_________________
"You know son don't you think you take airsoft a bit to serious." "O come on Dad you know you wished you played."

[Bigun]

I would agree, your standard M4 length barrel is likely to do the trick - you may want to be sure to support it in the barrel extension though (eliminating inner barrel wobble), in order to keep accuracy to it's maximum. My thoughts would be to use something solid but not necessarily permanent, such as a stack of washers or packed foam. Not sure what would work best as I'm brainstorming...but Tandy is right on your length.
_________________

[clutch]

Thanks Bro.